Crane System and Hoisting Equipment

Multi-Axis Controller V14

  • joystick for remote controls
  • mechanical life up to 6 million operating cycles
  • degree of protection up to IP65
  • modular design, therefore very flexibly applicable
  • combinable with many Gessmann-grips
  • encoder with integrated conductive-plastic potentiometer
  • contacts 2A 250V AC15
  • detent points and end position latching available
  • with spring return or friction brake


  • 2A 250V AC15
  • case clamp ® connection
  • 6 contacts per axis


  • potentiometer resistence:
    • 2 x 1,5 kOhm
    • 2 x 5 kOhm
    • 2 x 10 kOhm
  • 6 bit gray code

Current output

  • 20…0…20mA
  • 20…4…20mA
  • supply voltage 18-30V

Voltage output

  • 10…0…10V
  • supply voltage 18-30V


  • 0,5…2,5…4,5V
  • characteristic:
    • dual or
    • inverse dual
  • supply voltage 5VDC


  • spring return
  • friction brake
  • latching max. 6-steps
  • deflection angle max. +/-40 degree
  • end-position latching

Technical data

Mechanical life V14 6 million operating cycles
Supply voltage see interface
Operation temperature -40°C to +85°C
Degree of protection up to IP65

The Multi-Axis Controller V14 is a robust switching device for remote control and eletro-hydraulic applications.
The modular design enables the switching device to be used universally.
The V14 is resistant to oil, maritime conditions e.g. offshore / vessels, UV radiation typically from the sun.

Technical details may vary based on configuration or application! Technical data subject to change without notice!